GOVPH
MENU

Symbolism

A pearl buried inside a tightly-shut shell is practically worthless. Government information is a pearl, meant to be shared with the public in order to maximize its inherent value.

The Transparency Seal, depicted by a pearl shining out of an open shell, is a symbol of a policy shift towards openness in access to government information. On the one hand, it hopes to inspire Filipinos in the civil service to be more open to citizen engagement; on the other, to invite the Filipino citizenry to exercise their right to participate in governance.

This initiative is envisioned as a step in the right direction towards solidifying the position of the Philippines as the Pearl of the Orient – a shining example for democratic virtue in the region.

MIRDC Compliance with Sec. 93 (Transparency Seal) R.A. No. 10155 (General Appropriations Act FY 2015)1

2016

MFO Accountability Report Card (MARC - 1)

Management Accountability Report Card (MARC -2)

2015

MFO Accountability Report Card (MARC - 1)

Management Accountability Report Card (MARC -2)

 

I.  MIRDC'S MANDATE, VISION, MISSION AND LIST OF OFFICIALS

 II.  ANNUAL FINANCIAL REPORTS

Financial Accountability Reports (FARs)

Budget Accountability Reports (BARs)

 III. DBM APPROVED BUDGET AND TARGETS

IV. PROJECTS, PROGRAMS, AND ACTIVITIES, BENEFICIARIES, AND STATUS OF IMPLEMENTATION

V. ANNUAL PROCUREMENT PLAN

VI. SYSTEM OF RANKING DELIVERY UNITS AND INDIVIDUALS

VII. QUALITY MANAGEMENT SYSTEM CERTIFIED BY INTERNATIONAL CERTIFYING BODY OR AGENCY OPERATIONS MANUAL

Freedom of Information

 

Symbolism

A pearl buried inside a tightly-shut shell is practically worthless. Government information is a pearl, meant to be shared with the public in order to maximize its inherent value.

The Transparency Seal, depicted by a pearl shining out of an open shell, is a symbol of a policy shift towards openness in access to government information. On the one hand, it hopes to inspire Filipinos in the civil service to be more open to citizen engagement; on the other, to invite the Filipino citizenry to exercise their right to participate in governance.

This initiative is envisioned as a step in the right direction towards solidifying the position of the Philippines as the Pearl of the Orient – a shining example for democratic virtue in the region.

MIRDC’s Compliance with Section 93 (Transparency Seal) of R.A. No. 11639
(FY 2022 General Appropriations Act)

2023

MIRDC 2023 Scorecard

2022

MIRDC 2022 Scorecard

2021

MIRDC 2021 Scorecard

2020

MIRDC 2020 Scorecard

2019

MIRDC 2019 Scorecard

2017

MFO Accountability Report Card (MARC - 1)

Management Accountability Report Card (MARC -2)

2016

MFO Accountability Report Card (MARC - 1)

Management Accountability Report Card (MARC -2)

2015

MFO Accountability Report Card (MARC - 1)

Management Accountability Report Card (MARC -2)

I.  AGENCY'S MANDATE AND FUNCTIONS; NAMES OF ITS OFFICIALS WITH THEIR POSITION AND DESIGNATION, AND CONTACT INFORMATION

II. DBM APPROVED BUDGET AND CORRESPONDING TARGETS

III. MODIFICATIONS MADE PURSUANT TO THE GENERAL AND SPECIAL PROVISIONS

IV. ANNUAL PROCUREMENT PLAN, INDICATIVE APP NON-CSE; AND APP FOR COMMON-SUPPLIES AND EQUIPMENT

V. MAJOR PROJECTS, PROGRAMS AND ACTIVITIES, BENEFICIARIES, AND STATUS OF IMPLEMENTATION

VI.  ANNUAL FINANCIAL REPORTS

 

FAR NO. 1 - Statement of Appropriations, Allotments, Obligations, Disbursements and Balances (SAAODB) - Current Program

 

FAR NO. 1-A - Statement of Appropriations, Allotments, Obligations, Disbursements and Balances (SAAODB) - By Object Expenditures

 

FAR NO. 1-B - List of Agency Budget Matrix/Special Allotment Release Order/Sub-Allotment Release Order

 

FAR NO. 5 - Quarterly Report on Revenue and Other Receipts

 

FAR NO. 4 - Summary Report on Disbursements

 

FAR NO. 3 - Aging of Due and Demandable Obligations

 

FAR NO. 6 - Statement of Approved Budget, Utilizations, Disbursements and Balances for Trust Receipts

 

SAOB - Statement of Allotments, Obligations and Balances

 

BAR No. 1 - Quarterly Physical Report of Operations/Physical Plan

 

Detailed Statement of Current Year's Obligations, Disbursements and Unpaid Obligations (Financial Plan)

 

Financial Reports 2020

Report on Ageing of Cash Advances to COA

VII. ANNUAL REPORTS ON THE STATUS OF INCOME AUTHORIZED BY LAW TO BE DEPOSITED OUTSIDE THE NATIONAL TREASURY

VIII. QMS CERTIFICATION OF AT LEAST ONE CORE PROCESS BY AN INTERNATIONAL CERTIFYING BODY (ICB)

IX. SYSTEM OF RANKING DELIVERY UNITS AND INDIVIDUALS

X. AGENCY REVIEW AND COMPLIANCE PROCEDURE OF STATEMENTS AND FINANCIAL DISCLOSURES

XI. FREEDOM OF INFORMATION

 

Processing of succeeding FOI Requests.

To continuously exercise their right to access government information, all succeeding requests must be lodged through this Google Form link <bit.ly/FOIREQUESTFORM>.

 

 

"Molding the Future of Metal Industries"

The MIRDC’s project entitled “Human Resource Intervention for Sustainable Growth and Competitiveness of the M&E Sector:  Development and Implementation of Appropriate Training Curriculum Design for Computer Numerically Control (CNC) Machine Tool Programming and Operations” hits 853 trainee-graduates over its 2-year target of 800.  Started in September 2012 and until December 2014, the project activities were implemented as follows: 

Location      Batches     Number of Graduates
MIRDC            13                           261 
CAR                 7                           142
Batangas         3                            53
Talisay            5                            100
Iloilo               4                             81
Cebu               4                             80
Davao             2                             37
Cavite             3                             60

TOTAL:     853

After completing the training program, the trainee-graduates committed to render at least 3-year return service in the Philippines.  Each trainee was equipped with desired knowledge and skills after undergoing the 62-day CNC training program covering the following modules:

 

Part I.    Basic and Common Competencies: 

  • Basic Mathematical Concepts
  • Materials Selection
  • Dimensional Metrology and Limits & Fits
  • Reading and Interpretation of Technical Drawing
  • Occupational Health and Safety
  • Basic Maintenance Concepts
  • Conventional Milling and Turning Operations
  • Effective Human Relations and Work Ethics


Part II.   Core Competencies: 

  • CNC Programming and Operations (Milling and Turning) Basic CAD/CAM


Part III.  Industry Immersion

The implementation of the project had helped to produce CNC programmers and operators that specifically match the requirements of the M&E sector.  Engr. Robert O. Dizon, MIRDC Officer in Charge, said that every time that a batch graduates, we are adding new skilled people to the industry’s workforce and that we are coming closer to our goal of providing a solution to the ‘brain drain’ problem of Filipino CNC machinists. It is well benefitting that the performance will get better for the metals and engineering industries as the introduction of the Computer Numerical Control (CNC) machines in the production system has brought tremendous changes to the metalworking industry, hence improving the productivity and competitiveness of the M&E sector.

Dr. Danilo N. Pilar, Project Leader and Chief of the Technology Diffusion Division (TDD) of MIRDC led the project implementation in cooperation with the Philippine Council for Industry, Energy and Emerging Technology Research & Development (PCIEERD) as monitoring agency, DOST Regional Offices and partner support organizations such as the Technical Education and Skills Development Authority (TESDA), Metalworking Industries Association of the Philippines (MIAP), Philippine Die and Mold Association (PDMA) and Aerospace Industries Association of the Philippines (AIAP).  In the provision of training on Basic and Common Competencies, the other partner support organizations included the Don Mariano Marcos Memorial State University (DMMMSU) Mid-La Union Campus, Western Visayas College of Science and Technology (WVCST), Aklan State University (ASU) and the Sisters of Mary Technical Education Institute (Cavite and Cebu).  Several companies involved in the M&E sector participated in the project during the industry immersion stage of the training program.  Many of these firms immediately offered employment opportunities to the trainee-graduates.

 

CNC-853

Photos taken during the implementation of the project: Dr. Danilo N. Pilar, Project Leader (R)
with officials from the partner support organizations ((upper left), and a batch of trainees (lower left).

"Molding the Future of Metal Industries"

Click Here for Metalworking Industry Survey Questionnaire - ELECTROPLATING SECTOR

Click Here for Metalworking Industry Survey Questionnaire - WELDING SECTOR

 

 

Shop Owners and Mangers

Join this Online Survey and be Counted!

 

 online-survey

"Molding the Future of Metal Industries"

 

Engr. Jayson P. Rogelio and his co-authors Engr. Renann G. Baldovino and Engr. Geoffrey L. Abulencia from MIRDC’s Prototyping Division had a strong presence in the 7th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management (HNICEM 2014) joint with 6th International Conference on Computational Intelligence and Intelligent Informatics (ISCIII) and co-located with 10th Engineering Research and Development Technology (ERTD) Conference as their paper entitled “Design Optimization of a PLC-Based Controlled Microwave Vacuum Dryer for Stabilization of Fine-Grade Rice Bran (Oryza Sativa)” was selected for the Best Poster Paper Award.

Y

Engr. Jayson P. Rogelio presenting one of their papers submitted at the HNICEM 2014 Conference

 

Z

The certificate awarded to Engr. Rogelio and his co-authors after winning the Best Poster Paper Award.

 

 

The conference which featured plenary and invited talks by prominent scientists and engineers, parallel and poster paper presentations and industrial exhibits was held last November 12-16, 2014 in Puerto Princesa, Palawan. The said conference with the theme “Disaster Readiness through Humanitarian Technology” did not only cover the fields of engineering and computer science but also served as a platform to discuss new research development and innovations especially in promoting Information and Communications Technology and the Semiconductors and Electronics, which are two of ERTD’s research tracks. Moreover, the convention’s theme also served as a channel to promote the relevance of HNICEM/ISCIII to a broad range of engineering discipline and to bring new technologies to Filipinos particularly focusing on ways to alleviate the effects of inevitable disasters.

 

In addition to Engr. Rogelio and his co-authors’ entries for the said conference were three more papers for the oral paper presentation entitled “Development of an Automatic Tool Changer (ATC) System for the 3-Axis Computer Numerically-Controlled (CNC) Router Machine”, “A Pulse-Width Modulation (PWM) LASER Power Controller for the 3-Axis Computer Numerically-Controlled (CNC) LASER Machine”  (both co-authored by Engr. Renann G. Baldovino) and “Optimization of Machine Process Parameters through 2D Image Layout Enhancing and ArtCAM Post-Processing for 3D Machining” co-authored by Engr. Renann G. Baldovino, Engr. Geoffrey L. Abulencia and Mr. Virgilio Y. Macanip, Jr.

 

With their initiative to continuously contribute to the expansion of knowledge in research and development, Engr. Rogelio was happy to announce that they have successfully submitted two research papers for the upcoming IAENG International Conference on Control and Automation (ICCA) 2015, one of the conferences under the International MultiConference of Engineers and Computer Scientists 2015 organized by the International Association of Engineers (IAENG) which will take place in Hong Kong on March 18-20, 2015. The titles of their papers which were accepted for oral paper presentation are “A PC-Based Controller for the Computer Numerically-Controlled (CNC) LASER Machine” co-authored by Engr. Renann G. Baldovino and “Optimization of Microwave Vacuum Dryer Design Parameters Using CST Microwave Studio for Low-moisture Food Application” co-authored by Engr. Geoffrey L. Abulencia, Engr. Renann G. Baldovino, and Ms. Tracy Ann U. Tolentino.

 

  1. MIRDC Celebrates Christmas Season with a Funtasy-themed Party
  2. DOST-MIRDC Launches the Automatic Trash rake
  3. AIAP Encourages Organizations to Invest in the Aerospace
  4. FGD on Competitiveness Roadmap of the Philippine Tool and Die Industry cum "PARTNERSHAPE Conference"

Home

feed-image